If it happens for you to face a water supply breakdown in your house or your washer won’t fill itself with water automatically, you can easily fill it manually. But how to fill a top loading washing machine with water?
Below are some easy hacks for you regarding top-loading washing machines. These three easy methods can come through for you whenever you need clean clothes immediately.
Let’s discover how you can fill a top-loading washing machine with water.
How to Fill a Top Loading Washing Machine With Water
The process is pretty simple. First, you need to set the washer on the desired program cycle and open the lid. Now add your laundry and start manually filling the washer until it reaches the necessary level of water; usually, you’ll hear a beep. Close the lid, and your washer will start functioning normally.
Remember that you’ll need to fill it with water another two to three times before it completes the wash, depending on your chosen wash cycle, so you’ll need to be on constant alert.
If the washer doesn’t get a water supply within the required time, the washing cycle will face some issues.
Read more: How To Open A Front Load Washing Machine When Door Is Locked
Simple Ways to Fill a Top Loading Washing Machine With Water
Manually filling the washer from the lid
- First, select the program you want to use for your washing cycle depending on the preferred setting – low/medium/high.
- Next, add a detergent or a fabric softener and load the washer.
- Using a bucket, start filling the washer until it beeps, meaning the water is sufficient to run the machine.
- Close the washer’s lid and press the start button. The washer will start functioning. Another alternative is not to start the washer immediately; instead, leave the laundry to soak.
- Remember that you’ll need to refill the washer once the wash cycle is over two times during the rinse cycles.
Manually filling the washer from the detergent tray
How to fill a top loading washing machine with water if it’s automatic? Well, you can easily fill it manually through the detergent tray. However, I don’t recommend doing this too often, only when necessary.
Also, you must know that it will be difficult to intervene manually like this during normal wash cycles since you’ll need to add water three times – once for the wash and twice for the rinse cycle.
If you don’t add water when it’s needed, you’ll face problems with the washer and even risk damaging it.
- Load your washer with the laundry as you regularly do it.
- Before starting the washer, open the detergent tray and pour water until you see a very small water level inside the drum.
- Start the washer cycle.
- Once the wash cycle is over, the drum will stop for water. Open the detergent tray and add more water.
- Finally, after the first rinse and spin, it’s over, the drum will stop for water again, and you’ll need to fill it with water until the drum starts moving.
Install a submersible pump
If you cannot supply your washer with running water from a supply line, you can easily provide the water supply through a water sink. However, you’ll need a double sink, one for the fresh water and another for the drainer’s dirty water.
When there isn’t an inlet pump on your washer, and it’s fed from water pressure from the home supply, you can install a substantially larger submersible pump in the freshwater tank for a water supply.
This method will save you from issues during the cleansing and rinsing cycles. Keep in mind that only washing small loads to medium; will clean your laundry better.
Also read: Can You Put Fabric Softener Straight Into The Washing Machine?
Important Tips Regarding Washing Machine Manual Water Filling
Don’t add more than two inches of water below the top of the drum
Even after the water reaches the necessary limit, you can still add more water if you want to; but you mustn’t add more than two inches below the top of the drum, or you’ll risk flooding the space around the washer.
Use manual water filling only when it’s necessary
Most of the time, everyone will tell you that manual filling won’t damage your washer since it doesn’t know where the water supply comes from. However, if it becomes a daily practice for you, it might damage the panel circuit.
This issue appears due to the high and frequent chances of water leaking into it. Better to get the water supply fixed and save yourself from spending more money on buying a new washer.
Follow the manufacturer’s instructions
Always refer to the washing machine’s user manual for specific guidelines and instructions regarding manual water filling. Different models may have different requirements and procedures.
Safety first
Ensure that the washing machine is unplugged and turned off before attempting to manually fill it with water. This will prevent any electrical accidents or damage to the machine.
Conclusion
If you find yourself facing a water supply breakdown or your washing machine fails to fill itself automatically, manual water filling can be a simple solution. The process of filling a top-loading washing machine with water is straightforward.
I hope you have learned how to fill a top loading washing machine with water, and now you will not have a problem.
Remember, for optimal results, it is recommended to wash small to medium-sized loads. Following my easy hacks ensures that your laundry gets clean even without an automatic water supply.
