Experiencing the movement of a washing machine during cycles is a widely encountered occurrence that many washer owners may face. I encountered this issue and embarked on a quest to find an effective solution to address it. So I wondered: “What can I put under my washer to keep it from moving?”

While searching for a remedy, I delved into various do-it-yourself projects and explored different accessories that could resolve the matter. I sincerely hope that the insights I gained during this process can also be of assistance to you.

Within the following discourse, I will expound upon the underlying causes contributing to the movement of washing machines and provide practical guidance on rectifying this matter.

source: pexels.com

What Can I Put Under My Washer to Keep It From Moving?

The anti-vibration rubber feet pads are the best solution to keep your washing machine from moving. These pads are accessories made specially to keep washers in place, and you can easily find them in many stores or on Amazon. Other solutions are anti-slip rubber mats and machine stands.

Those solutions are commercially produced products you can buy in local and online stores. One of these solutions might cost you around $20, which is not a sky-high price for a permanent solution product.

Besides the produced products, you can improvise and make DIY washer anti-slip pads out of pool noodles, anti-skid pads, and other items you can easily find at home. The DIY solutions might save you from paying over $20 for anti-slip pads and mats.

Causes of Walking Washing Machine

Improper legs level

All washing machines have adjustable legs that should be properly leveled to prevent the machine from moving. This is often the main cause that a washing machine moves, so it is best to check it first.

To adjust the legs, you should spin them until you notice that the machine is stable enough. In some cases, the floor might be uneven and make the machine unstable, even if all the legs are at the same level.

If you think that the legs were properly leveled, check their condition. Over time, they might crack and break, and you should replace them with new ones.

Uneven laundry load

You should understand that the laundry you put into the washer gets wet and heavier during the washing cycle. If you have placed something heavy while the machine tub is not completely filled, your machine might move because of the fast spin motions and unbalanced load.

This may happen even if the washing machine legs are properly adjusted.

Slippery floor

If everything seems fine with the laundry load and the machine legs, but the machine is not in the initial place, it might be the floor.

In most cases, the machine may move if the floor is wet because of different reasons. If your washer is inside the bathroom, the steam from the shower might make the tiles wet and cause the machine to move.

Another explanation is spilled water. Check for leakage, whether from the machine or other appliances near the washer.

Read more: Why Does My Washing Machine Keep Beeping?

Solutions for a Walking Washing Machine

Anti-slip rubber pods

These tiny pods are the best solution so far. You can buy them in-store or purchase on Amazon. The price ranges from $10 to $20 depending on their size, quality, and brand.

The pods come in a package of four or more and should be placed under the washing machine’s feet. They are usually small and aesthetic and do not stand out as the mat or other solutions.

Anti-slip rubber mat

The anti-slip rubber mat is a multipurpose mat that can also be used for moving washers. You can cut a piece of it in size to reach each of the four washer legs. This solution is affordable and available in many stores and on Amazon.

The only drawback about this mat is that it is visible and stands out from the machine and floor.

Washing machine stand

The stand is an easy and long-lasting solution for a moving washer. The metal construction can keep the machine above and secure on the floor. The stands are generally made of strong and durable metals, meaning they can be a money-worth investment.


You can make anti-vibration pods using any foamy item in your house. It can be a pool noodle or rubber puzzle flooring. Just cut circles as big as the washer’s feet and secure them on the floor.

Also read: Why Do Lights Flicker On A Running Washing Machine?


Dealing with a moving washing machine during cycles is a common issue that many people face. Fortunately, there are various solutions available to keep your washer in place. So, what can I put under my washer to keep it from moving?

The most effective option is using anti-vibration rubber pads, which can be easily purchased from stores or online. Alternatively, you can opt for anti-slip rubber mats or invest in a washing machine stand for a more long-lasting solution.

If you prefer a do-it-yourself approach, you can create your own anti-slip pads using items like pool noodles or rubber puzzle flooring.

By addressing the causes of a moving washer and utilizing these solutions, you can enjoy a stable and hassle-free laundry experience.